Snowboard-Aufkleber

(60)

Custom snowboard stickers for boards, helmets, and gear, printed on waterproof vinyl.

Every order is printed from the artwork you upload, in the size, finish, and quantity you choose, with a digital proof before production.

Customize your stickers

Choose each option to see your price instantly.

1 Shape
2 Finish
3 Size
4 Quantity
Your price
$15.00
50 stickers $0.30 each 2″ × 2″ · Gloss Volume discount included
Required
The selected Variant price will be used in your Shopify cart.

Your print-ready proof will arrive within 24 hours. Review it carefully so production can proceed.

Helpful Details Before You Order

Design Tips

  1. Prepare artwork at 300 DPI at the final print size.
  2. Use CMYK color mode when possible. Screen color can differ slightly from printed color.
  3. Keep small text, fine lines, borders and narrow cut areas thick enough to print and apply cleanly.
  4. Review spelling, scale, color, border and cut shape carefully on the digital proof.

Artwork & Digital Proof

Upload one design using the highest-quality file available. We check print readiness and send a digital proof before production begins.

Free Shipping

Free shipping is available. Delivery timing begins after proof approval and production. Review our shipping policy.

Return Policy

This item is custom-made. If it arrives defective, damaged, incorrect, missing or materially different from the approved proof, review our Return & Refund Policy for eligibility and next steps.

Cold flex and meltwater need a finished-sample check.

Application planning

Cold flex and meltwater need a finished-sample check.

Apply only to compatible nonfunctional areas. Condition and test the finished sticker through cold, moisture and flex cycles representative of the real board and transport routine.

Not sure about the construction? Use Sticker Guide

Outdoor & gear

Match the product to the real job.

Plan snowboard stickers for cold, moisture, flex and transport abrasion while keeping the base, bindings and required markings unobstructed.

Before productionIf any condition is unknown, sample-test the finished sticker on the real surface.

Compatible smooth topsheets, hard gear cases and permitted helmet areas 01
Best for

Compatible smooth topsheets, hard gear cases and permitted helmet areas

Clean, dry, smooth topsheet or rigid coated equipment surfaces 02
Surface

Clean, dry, smooth topsheet or rigid coated equipment surfaces

Cold, snow, meltwater, sunlight, flex and travel friction 03
Exposure

Cold, snow, meltwater, sunlight, flex and travel friction

Waxed bases, textured topsheets, binding zones, deep curves or unknown factory coatings 04
Test first

Waxed bases, textured topsheets, binding zones, deep curves or unknown factory coatings

Complete sticker construction

Five layers. One complete sticker system.

A sticker works as one construction. Review each layer’s job, then confirm the exact material codes and test the finished build on the real surface.

Five separated sticker material layers for outdoor & gear
Layers are separated for clarity and are not shown to scale. In production they work as one finished construction.
01
FacestockFlexible, abrasion-oriented exterior vinyl film candidate.
Why this choice

Boards combine flex, curves, edge exposure and repeated contact, so a brittle or dimensionally unstable face can lift or crack early.

02
AdhesiveHigher-tack, water-resistant acrylic candidate matched to the exact metal, paint or plastic surface energy.
Why this choice

Rain alone does not determine adhesion; wet-out, application temperature, curve stress and low-energy plastics control edge lift.

03
InkExposure-appropriate CMYK ink system with defined cure and color requirements.
Why this choice

Sunlight, moisture and temperature can shift color or weaken print, so the actual ink and cure must support the declared exposure.

04
ProtectionHigh-abrasion overlaminate candidate matched to water, sunlight and surface contact.
Why this choice

The printed layer needs more scuff protection than a low-contact item, while wash, immersion and long-life claims still require separate testing.

05
Liner & applicationStable release liner suited to die cutting and controlled application on curved gear.
Why this choice

Predictable release helps placement without stretching the sticker, trapping contamination or creating early edge stress.

Engineering boundary: these are use-case-specific starting directions, not finished supplier specifications or unconditional performance claims. Confirm the exact facestock, adhesive, ink, protection and liner codes, then validate the finished construction on the real surface when the application is unfamiliar or demanding.

Common uses for Snowboard-Aufkleber

See where this product fits—and where to test first.

Use these examples as practical starting points. The exact surface, shape, exposure and service period still determine whether a finished sample should be tested.

Compatible topsheets

Compatible topsheets

Keep bindings, base, serials and functional areas clear; test cold flex and meltwater.

Travel cases

Travel cases

Use smooth hard cases for easier adhesion and lower flex than the board itself.

Permitted helmets

Permitted helmets

Follow helmet manufacturer guidance before applying decorative materials.

Club & rental gear

Club & rental gear

Confirm removal, identification and surface compatibility before using stickers on shared gear.

Why Inkelligent

A clearer path from artwork to application.

Custom stickers are easier to order when the artwork, material direction and production approval are handled as one connected process.

Proof before production

Review the artwork, scale, cut shape and visible details on a digital proof before the order moves into production.

Practical guidance

Use the surface, shape, exposure and service period to identify a sensible starting construction instead of relying on one material name.

Clear testing boundaries

When a surface or condition is unfamiliar, we identify what still needs confirmation rather than presenting an unconditional performance promise.

From artwork to production

A clear four-step order path.

  1. 01

    Choose

    Select size, finish and quantity for the real application.

  2. 02

    Upload

    Add print-ready artwork or the best file you currently have.

  3. 03

    Review

    Check the digital proof carefully before production begins.

  4. 04

    Print & ship

    Your approved order is produced and shipped to you.

Before you approve

Useful checks, without the guesswork.

Use these answers to identify what should be confirmed in the proof or a physical sample.

Will this stick to every surface?

No adhesive is universal. Cleanliness, coating, texture, surface energy, curvature and dwell time can change the result. Test the exact surface when any of these are unknown.

What does gloss versus matte change?

Finish changes appearance, glare and surface feel. It may also influence scuff visibility and handling, so choose in the context of the artwork, lighting and use conditions.

Does “outdoor” mean every surface and weather condition?

No. Outdoor use adds light, moisture, temperature and handling variables, while the substrate still controls adhesion. Record the actual surface and exposure, then validate the finished sample.

When should I request extra guidance?

Ask before production when the surface is unknown, textured, coated, tightly curved, exposed to chemicals, safety-critical or expected to remove cleanly after a long dwell.

Need a different starting point?

Match the use conditions first—or compare every product.

  • 5 stars: 45 (75%)
  • 4 stars: 15 (25%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
A
Alyssa Ford

Bought these for my teenage son because every piece of his gear has to be customized. He stuck them on his snowboard and the side of his helmet the night they arrived. We got a full weekend on the mountain right after, with snow, melt, and gear getting tossed in the back of the car, and they still looked bright. No bubbling, no corners lifting, and the print is sharp up close too.

M
Megan Foster

Cute designs and tough material.

G
Garrett Nolan

Held up through wet snow and car rack abuse. Impressed.

E
Erin Caldwell

What I liked most was that they didn't feel flimsy. The backing peeled off cleanly, they went on without much fuss, and once pressed down they stayed put. I've had them on my helmet for several icy mornings now and they still look brand new.

G
Gavin Pierce

Nice color, tough finish.

H
Hannah Cooper

Love how these look on matte black gear. Sharp colors.

S
Sabrina Cole

My teenage son wanted to make his snowboard gear stand out from everyone else's at the mountain, so I added these to his Christmas gift. He immediately put a few on his board and saved the rest for his helmet and gear box. The print quality is really solid, and they feel thicker than the flimsy stickers you usually get. We had a rough weather day last week with snow turning into sleet, and nothing lifted or faded. Packaging was simple and everything arrived flat, which I appreciated.

L
Lauren Mitchell

Honestly impressed. I expected them to start scratching up after the first run, but they've stayed looking fresh. The finish has a nice clean look too, not cheap or blurry.

C
Chloe Bennett

Put a couple on my helmet and one on my board. Colors are sharp and they haven't peeled at the edges after several cold days out.

O
Olivia Hayes

Cute designs and actually waterproof.

T
Tyler Donovan

I bought these because my son wanted his board to stand out in the rack at the lodge, and these definitely did the job. Application was easy as long as you clean the board first. We rode in wet snow all weekend and nothing bubbled or lifted. Nice thickness too, not those flimsy paper-thin stickers.

S
Samantha Doyle

Bought these as a stocking stuffer for my brother, who's super picky about his gear. He actually texted me from the mountain to say they looked sick on his board, so that was a win. The stickers came neatly packed, no bent corners, and the material feels durable right away. Good gift option for snowboarders who already seem to own everything else.

E
Ethan Mercer

Shipping was quick, and the stickers came flat and well packed instead of bent up in a thin mailer. I put one on the nose of my board and another on my goggles case. Both have taken a beating in and out of my bag with no issues so far. For the price, I’m impressed.

E
Ethan Parker

These held up way better than the random decals I bought at the ski shop. My board gets tossed in the truck bed, scraped against racks, and dragged through wet snow, and the stickers still look clean. No bubbling, no edge lifting. I'd order again.

K
Kevin Ward

Not just for snowboards. I put one on my water bottle and another on my helmet, and both have held up great in cold weather.

L
Luke Sanderson

No complaints. Durable and look great on black gear.

M
Megan Whitaker

Put two of these on my helmet and one on the tail of my board. Colors are sharp and they stuck cleanly without bubbling, even in the cold garage.

M
Megan Collins

Awesome stickers. Stayed on through slush and freezing temps.

B
Brandon Hayes

Colors are sharp and they actually stay put in cold weather. I was worried they’d peel after a few runs, but they still look new.

C
Caleb Whitman

Not just for boards. I put one on my boot bag and one on my helmet, and both are holding up really well in wet conditions.

T
Tyler Beckett

Bought these before a weekend trip because my old board was looking pretty beat up. I was mostly hoping for something that looked cool, but the material is actually tough. After two days of slush, lift lines, and boards bumping around in the lodge, the stickers still look new and the edges haven’t peeled. Nice finish too, not cheap-looking.

H
Hannah Pierce

I usually avoid decorative stickers because they start peeling after one storm, but these are noticeably better made. I cleaned the top sheet of my board, let it dry, and pressed them on the night before a trip. We got a mix of powder, sleet, and some rough handling loading gear, and they still look clean. If you're trying to personalize your setup without it looking junky, these are worth it.

B
Brandon Reed

I bought these for my teenage son to customize his snowboard before a trip to Colorado. He was picky about how everything looked, so I was relieved when he immediately liked the style and started planning where each sticker should go. After five days on the mountain, they still looked bright and stuck down tight even with snow, ice, and all the usual abuse. Nice little upgrade for his gear.

H
Hannah Brooks

I used these on a helmet and a water bottle first just to test them before putting one on my new board. After a month of use, including freezing mornings and wet afternoons, they still haven’t faded or scratched up much. Adhesive feels strong without being impossible to place. Good buy if you actually ride and don’t just want something decorative.

J
Jessica Nolan

Not flimsy at all. The finish feels tough and the design pops against my white snowboard.

K
Kelsey Monroe

I like that they don’t look like generic novelty stickers. The material is thicker than expected and has that rugged feel that works well for boards and helmets.

R
Rachel Foster

Smaller than I pictured, but the print quality is really good and the adhesive is solid.

C
Chloe Barrett

Cute, tough, and easy to apply.

L
Lauren Pierce

These were a stocking stuffer for my boyfriend and ended up being one of his favorite gifts. He’s picky about graphics and usually complains if stickers look glossy or cheap, but he liked these right away. We applied them after cleaning the board and they went on smoothly with no bubbles. After two weekends on the slopes, they still look solid.

E
Ethan Mercer

Held up through slush, ice, and roof-rack abuse. Impressed.

A
Alyssa Porter

Bought these for my teenage son because he wanted his snowboard to stand out from everyone else’s at the mountain. He put them on the night before a weekend trip and I figured at least one would get scraped up or start curling after all the slush and rough handling. Surprisingly, they held up really well and still look clean after several trips. Nice print quality too, not blurry or cheap-looking.

R
Rachel Donnelly

I was mostly hoping they wouldn't scratch immediately, since my board gets knocked around a lot traveling. So far they've survived baggage handling, a couple wipeouts, and being leaned against rough lodge walls. Still glossy and easy to spot from the rack.

J
Jenna Whitaker

Exactly what I wanted.